E-glass Fiber Chopped Strand Mat
Update: 2015-08-05 14:41:15 Categories: Fiberglass Mat times viewed by :2645
Brief introduction
·Its direction is 0°/45°/90°/-45°that can be adjusted between ±20°~±90°,also can be stitched with chopped strand (50g/㎡~500g/㎡) or non woven fabric which weight is between 600g/㎡ and 2000g/㎡,width is between 5~100 inch.
·Properties
·well-distributed ,good lay out, no spot.
·Quick impregnation,easily removing air bladder .
·Designable for fiber glass structure, easily fixing ,good strength.
·Application
·Good choice for yacht, blade, auto, pultrusion products.
·Technical data
Fiberglass chopped strand mat
Brief introduction
·It is sheet mat mat manufactured by spreading continuous filament roving of 50mm in length randomly and uniformly in combination with polyester powder binder or emulsion binder.
Properties
·Fiber and binder spread uniformly, no incompact fiber, oil spot, blotch.
·Fast resin impregnation, good mould obedience, easily removing air bladder.
·High mechanical strength, wet strength reservation rate.
Application
·High mechanical strength, anti corrosion, good insulation, widely used in boat, auto,transformer,anti-corrosion pipe,etc .
Technical data
Type of glass |
Nao content (%) |
Binder content(%) |
Moisture content(%) |
Sizing |
Type of binder |
E-glass |
E-≤0.8 |
2.0-6.0 |
≤0.2 |
Silane |
Powder 、PVAC Emulsion |
Specifications
Code |
Total weight (g/m2) |
Width (mm)
Roll weight(KG) |
(um) |
Applying process |
Resin compatible |
EMC |
150、225、300、450、600、900 |
1040/30
2080/60 |
11-13 |
Hand lay up,
RTM,Mould press,Vacuum |
UP,VE.EP |
Packing
It is rolled on plastic pipe,then packed by plastic film,carton or PE bag outside.rolls can be loaded into a container directly or on pallets.
Storage
No special requirement, stored in dry , cool place.Don’t open packing if no use .